NS0-093 VALID EXAM SAMPLE | NS0-093 TEST PRACTICE

NS0-093 Valid Exam Sample | NS0-093 Test Practice

NS0-093 Valid Exam Sample | NS0-093 Test Practice

Blog Article

Tags: NS0-093 Valid Exam Sample, NS0-093 Test Practice, NS0-093 Certification Test Questions, NS0-093 Exam Tutorial, NS0-093 Learning Mode

When new changes or knowledge are updated, our experts add additive content into our NS0-093 latest material. They have always been in a trend of advancement. Admittedly, our NS0-093 real questions are your best choice. We also estimate the following trend of exam questions may appear in the next exam according to syllabus. So they are the newest and also the most trustworthy NS0-093 Exam Prep to obtain.

The NS0-093 certification exam is a valuable investment for hardware engineers who want to build a career in storage and networking. NetApp Accredited Hardware Support Engineer certification provides an opportunity for engineers to demonstrate their skills and achieve recognition for their technical abilities. It also opens up new career opportunities and enhances the overall value of an engineer's resume.

The NS0-093 certification exam consists of 60 multiple-choice questions that must be completed within 1 hour and 30 minutes. NS0-093 Exam covers a variety of topics, including hardware installation and configuration, disk shelves and disk drives, storage systems, data protection, and troubleshooting. To prepare for the exam, NetApp offers a range of training courses and resources, including instructor-led courses, e-learning modules, and practice tests. Individuals who pass the NS0-093 certification exam will be able to demonstrate their knowledge of NetApp hardware support and will be well-positioned to pursue a career in this field.

>> NS0-093 Valid Exam Sample <<

Get Success in Network Appliance NS0-093 Exam with Flying Colors​

Many exam candidates attach great credence to our NS0-093 simulating exam. You can just look at the hot hit on our website on the NS0-093 practice engine, and you will be surprised to find it is very popular and so many warm feedbacks are written by our loyal customers as well. Our NS0-093 study prep does not need any ads, their quality has propaganda effect themselves. As a result, the pass rate of our NS0-093 exam braindumps is high as 98% to 100%.

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q43-Q48):

NEW QUESTION # 43
Following an unexpected takeover, the taken-over node is waiting for giveback. The administrator plans to perform a giveback with the option -cfo-only true.
What happens if this option is used?

  • A. Only the data aggregates are sent back.
  • B. Only SVM root volumes are sent back
  • C. Only a simulation of the giveback is performed.
  • D. Only the root aggregate is given back.

Answer: A

Explanation:
Purpose of the -cfo-only true Option:
* This option is used during the giveback process in a NetApp cluster to control which aggregates are returned to the original node.
* By specifying -cfo-only true, only the data aggregates are given back to the original node, while the root aggregate remains with the takeover node.
Use Case:
* This command is helpful when you want to test the aggregate giveback functionality or if the root aggregate requires further investigation or maintenance before returning it to the original node.
NetApp Reference Documentation:
* The "ONTAP High-Availability Configuration Guide" and "Cluster Failover Management Guide" detail the behavior of the -cfo-only option during giveback scenarios.


NEW QUESTION # 44
Which two NetApp tools should be used when troubleshooting the root cause of an unexpected controller reboot? (Choose two.)

  • A. Active IQ Config Advisor
  • B. ONTAP Mediator
  • C. ONTAP CLI
  • D. Active IQ Unified Manager
  • E. Active IQ Digital Advisor

Answer: C,D

Explanation:
To troubleshoot the root cause of an unexpected controller reboot, the following tools are commonly used:
* What it does:Provides monitoring and performance data for the ONTAP cluster, including historical event logs that may help identify the root cause of a reboot.
1. Active IQ Unified Manager
* What it does:The CLI allows you to gather logs and status information directly from the affected node.
Commands like event log show and system core are essential for identifying the reason behind the reboot.
2. ONTAP CLI
* B. Active IQ Digital Advisor:
* This tool focuses on predictive analytics and proactive recommendations, not troubleshooting unexpected reboots.
* D. ONTAP Mediator:
* This tool is used for managing MetroCluster configurations, not for troubleshooting reboots.
* E. Active IQ Config Advisor:
* This tool checks for configuration best practices but does not provide detailed logs or reboot diagnostics.
Why Other Options Are Incorrect:
* NetApp "ONTAP System Management Guide" emphasizes the use of Unified Manager and CLI for troubleshooting system issues.
References:


NEW QUESTION # 45
Which two steps are required to replace a drawer in a DS460c shelf? (Choose two.)

  • A. Shut down both nodes.
  • B. Evacuate all drives in the drawer.
  • C. Disconnect the cable chains from the chassis.
  • D. Power off the shelf.

Answer: B,C


NEW QUESTION # 46
When you add a new disk to an ONTAP 9.1 system, you see an error that the disk "has raid label with version (16), which is not within the currently supported range (14-15)." What is one possible cause of this error?

  • A. The disk is a non-zeroed spare.
  • B. The disk needs to be assigned to the new system.
  • C. The disk firmware is too new for ONTAP software.
  • D. The disk was in a system with a newer version of ONTAP software

Answer: D

Explanation:
Explanation of RAID Label Versions:
* Disks in ONTAP systems contain metadata known as RAID labels. These labels store critical information such as ownership, aggregate membership, and versioning.
* The error indicates a mismatch between the RAID label version on the disk and the supported versions of the ONTAP system.
Why Option D Is Correct:
* If a disk has a RAID label created by a newer version of ONTAP (e.g., version 16) and is then inserted into a system running an older version of ONTAP (e.g., supporting versions 14-15), the label will not be recognized.
* This mismatch causes ONTAP to reject the disk.
Resolution:
* Upgrade the ONTAP version to match the RAID label on the disk.
* Alternatively, zero the disk to reset its RAID label, but this will erase all data on the disk.
NetApp Reference Documentation:
* The "ONTAP Disk Management Guide" and "ONTAP Compatibility Matrix" explain RAID label versions and compatibility issues when moving disks between ONTAP systems.


NEW QUESTION # 47
Which two commands confirm whether an aggregate is WAFL inconsistent? (Choose two.)

  • A. wafiron show <aggregate>
  • B. node run -node <node> sysconfig -r
  • C. storage aggregate show
  • D. node run -node <node> sysconfig -a

Answer: A,B

Explanation:
To determine whether an aggregate is WAFL (Write Anywhere File Layout) inconsistent, the following two commands can be used:
* What it does:This command directly checks the WAFL consistency status of the specified aggregate. If an aggregate is WAFL inconsistent, it will report the inconsistency in the output.
* How to use:
* Run the command: wafiron show <aggregate> (replace <aggregate> with the name of the aggregate).
* Look for indications of WAFL inconsistency in the output.
* Why it's relevant:The wafiron utility is specifically designed to provide WAFL status and diagnostics.
It is the most accurate and direct way to confirm whether an aggregate is inconsistent.
* References:
* "WAFL Troubleshooting Guide" from NetApp highlights the wafiron show command as a primary tool for checking aggregate consistency.
1. wafiron show <aggregate>
* What it does:This command displays RAID information for all aggregates on the specified node. If an aggregate is WAFL inconsistent, it will be explicitly mentioned in the output.
* How to use:
* Run the command: node run -node <node> sysconfig -r.
* Check the output for the phrase "WAFL inconsistent" under the corresponding aggregate.
* Why it's relevant:This command provides additional context, such as the RAID group details, which can help understand whether the inconsistency is isolated or part of a larger issue.
* References:
* "ONTAP CLI Commands Guide" specifies sysconfig -r as a method to verify aggregate status, including WAFL consistency.
2. node run -node <node> sysconfig -r
* C. storage aggregate show:
* This command displays aggregate configuration and usage information but does not report WAFL inconsistency.
* D. node run -node <node> sysconfig -a:
* While this command shows detailed hardware configuration information, it does not include WAFL consistency status for aggregates.
Why Other Options Are Incorrect:


NEW QUESTION # 48
......

The pass rate of the NS0-093 training materials is 99%, we pass guarantee, and if you can’t pass, money guarantee for your failure, that is money will return to your account. You just need to send the participation and the failure scanned, money will be returned. We can ensure that your money will be returned, either the certification or the money back. Besides the NS0-093 Training Materials include the question and answers with high-quality, you will get enough practice.

NS0-093 Test Practice: https://www.actualtestpdf.com/NetworkAppliance/NS0-093-practice-exam-dumps.html

Report this page